MINI QUICK-MOUNT PACKAGE

This is a standard mini fire place, built into a quick-mount ready to install package, simply mount to the ground, no heat shielding or hearth needed as its all built in, simply install it in place and your good to go, wood box below is optional.

It has a extra floor in the fireplace for heat shielding, then a third floor (heat box) with heat shielding all the way around (back & sides) and stands 100mm above the fireplace.

around 6KW to 8KW peak heat output
baffle plate.
You can cook on the top of these to.
Airflow adjustment.
Comes finished in high heat black paint.
Wooden knob handles (acacia)
Tempered fire glass so you can watch it burn away and see when you need to add wood.

Dimensions:
305mm wide x 550mm deep x 500mm high, with wood box the unit is 905mm high

Weight: 30kgs without wood box - wood box weight is 23kgs - Total weight with with box is 53kgs

We should have 1 or 2 in stock just ask, but if not the turn around time 1-3 weeks.

Mini fire places perfect for house buses, tiny homes, cabins, camping, tents, decks, patios, indoor or outdoor, caravans or campers, sheds & man caves, sleep outs etc,

Made by hand in New Zealand out of thick 3mm Corten steel, AKA weathering steel.

Awesome mini fires at awesome value, nothing on the market better for even close to the price of these, unbeatable value & quality

Multi fuel burner/heater, wood and coal (please note for coal you will need to purchase a burn plate that sits in the bottom of the fire so the air can get below and to make the bottom of the fire last longer using hot coal you can also use this for the wood to you can add to cart from the website listings fire accessories) 

Corten steel can last upwards of 100 years without paint, it rusts a thick layer acting better then any paint would, sealing itself from rusting further once fully weather, but we paint it aswell so these should last a few lifetimes, and if you scratch paint off over time you don’t have to worry either.

Like a lot of smaller fires these pull air in from inside the room, we have tested these to work without door & window seals, saving you money by avoiding adding complicated channels & seals which almost doubles the cost, but there tested & just are safe with correct use & installation

These fires are classed as un tested appliances and therefore are made for places that don't require a permit they are not un tested or un safe, just untested by the official labs (emissions testing) they may still be able to get permitted depending on your councils rules, they are classed as multi fuel heaters so are excluded from the emissions act, but also can be classed as just a wood burner, but as a multi fuel heater they only need to meet building code for permitted installations as per code, but check with your council for there rules as they can differ, but since they are classed as a un tested appliance, they are sold strictly for outdoor use or anywhere a permit isn’t required.

By purchasing from Benjineering "Ben Hodge" in person, or through any sales platforms, or third party representative you agree to the terms and conditions which can be found at the bottom of the website, at benjineering . nz / policies / terms of service